How To Conserve Energy Despite Having A Cold Room?

Ask any one of the many cool room suppliers Parramatta has and they’ll tell you that the biggest consideration for cold room installation is energy savings. This is to be expected, since cold rooms eat up a lot of energy, and it’s the primary culprit for high electricity bills. Don’t worry though, as you can make full use of your cold room’s capacity while keeping your bills at a reasonable rate. Here are just some tips that you can observe to do that.
Make Closing Doors an Important Rule
This might seem like a no-brainer, but you have no idea how many cold rooms suffer unnecessary energy wastage through improperly closed doors. Busy employees running in and out of the cold room can forget to shut the door, especially if they’re carrying a heavy load. Put up a sign on your cold room door reminding employees to close the door. Make it an important rule in your company, one that has sanctions if not followed.
Check Your Door Elastomers
Remember that black rubbery frame around your refrigerator that helps seal your fridge shut as soon as you close it? That same elastomer can be installed into your cold room cabinets by cool room suppliers in Parramatta. Employees don’t even need to properly shut the door, all they need to do is nudge it close, and once the door touches the frame, the elastomer will do its job of sealing the door.
Elastomers do wear out in time because of moisture in the room and the low temperature. Regularly check your elastomers to make sure they compress properly when you close cabinet doors. At the first sign of tears, looseness and other problems, find Parramatta cool room suppliers who will fix the problem right away.
Cooler Choice and Maintenance
When creating your cold room for the first time, find cool room suppliers Parramatta has that will give you the best options on energy saving coolers and refrigeration units. Brands work differently, with some being more energy efficient than others. Energy efficiency should be the number one factor that influences your purchase decision.
No matter how good your coolers are, they will wear out in time because of moisture and low temperature. Many of the cool room suppliers Parramatta has now also offer regular maintenance service, so choose a company that can do both installation and preventive maintenance. Companies like provide such services for your convenience.
Coolroom Capacity
Maybe the problem lies in the layout of your cold room. Your cold room size should be compatible with your needs. For example, if you have a large cold room but it’s only half-full most of the time, maybe a small cold room would be better for you. Click here New Wave Panelling
Also, your coolers and other refrigeration units should be compatible with your needs and room size. If you’re using small coolers for a large cold room, then it’s probably set to the highest setting for more efficiency, which takes up more wattage.
Having a cold room in your facility does not mean having a high electricity bill. The cool room suppliers Parramatta has can help you build an energy efficient cold room with matching equipment, as well as provide long term maintenance to keep your refrigeration equipment working properly.

Leave a Comment

Your email address will not be published. Required fields are marked *